Security Pin; Set-Up - BT SYNERGY 1400 User Manual

Setting your own base station PIN
code
You can set your own four-digit code
number for your Synergy 1400 base
station. This prevents unauthorised
users from registering or de-registering
handsets on your Synergy 1400 base
station.
Press the button until the display shows

SET-UP.

Press the button. Display shows
HANDSET.
Press the button. Display shows
BASE.
Press the button. Display shows

SECURITY PIN.

Press the button. Display shows
OLD PIN - - - - - - . (default 0000).
Enter the current PIN code
DIAL
(default 0000). The - - - - marks
disappear one by one. The entered
numbers are not displayed.
Press the button. Display shows
NEW PIN - - - - - - .
Enter the new PIN number. The - - - -
marks disappear.
Press the button. Display shows
NEW PIN - - - - - - again. Re-enter the new
PIN number, so that the base station
can check that there was no mistake on
entering the PIN.
Press the button.
The display shows OK. You hear a
confirmation beep. The display then
changes to SECURITY PIN.
Press and hold
standby.
PLEASE NOTE
Keep a record of your PIN number in the boxes
on the fold-out page at the front of this guide.
button to return to
41