Ring Vol; Using The Quickdial Memory; Telephone - BT SYNERGY 1400 User Manual

To adjust the handset ringer volume
Press buttons in order shown
The handset ringer can be set to
HI OFF
or
Press the
display shows SET UP.
Press the
HANDSET.
Press the
Press the
the display shows RING VOL.
Press the
current setting HI (LOW or OFF ).
Press the
Display shows e.g. LOW (HI or OFF ).
Press the
that the change has been made.
Press
(HSET 1).
PLEASE NOTE
If the handset ringer volume is set to off the
handset display will show SILENT and the
handset will not ring.
12
. (The factory setting is
button several times until
button. Display shows
button. Display shows LEVEL.
button several times until
button. Display shows the
to change the setting.
button. A beep confirms
button to return to standby
To page the handset
Press and release the blue
button on the base station.
LOW
,
LOW
. The handset rings for about 10-12
seconds. Display shows PAGE and the
you find a misplaced handset. You
cannot hold a conversation between the
handset and the base station.
If you hit the page button by accident or
want to cancel it, press and release the
button quickly.
If you have more than one handset
registered to the base station, all the
handsets will ring.

Using the quickdial memory

Shared and personal quickdials
You can store up to 20 numbers on your
Synergy 1400.
Shared telephone numbers
10 numbers can be stored in your shared memory.
These numbers can be quick dialled from any
Synergy handset registered with the base station.
Personal telephone numbers
A further 10 numbers can be stored in your
personal memory. These numbers can only be
used to quickdial from the handset they are
stored in.
PAGE
flashes. Paging is useful to help