Adjusting The Volume Of - BT SYNERGY 1400 User Manual

To set the Answer Mode and choose
your outgoing message
Press buttons in order shown
Your Synergy 1400 answering machine
is delivered with the setting
and Record
set to
Answer Only
Press
ANS PHONE
Press
OFF PLAY
or
Press
SET-UP
is displayed.
Press
Press
ANS MODE
Press
setting,
Press
option is displayed.
Press
YOUR OGM
to either
(ie. depending on which option you
have just selected).
Press
two.
Press
A confirmation tone sounds and the
display immediately returns to
20
Answer
. However, it can also be
- the choice is yours.
button once. Display shows
.
ANS ON
button. Display shows
, if there are messages.
button several times until
REC OGM
button. Display shows
button several times until
is displayed.
button. Display shows current
ANS ONLY ANS AND REC
or .
button until your preferred
button. Display now shows
DEFAULT OGM
or , which applies
or
ANS ONLY ANS AND REC
button to toggle between the
button to confirm your choice.
ANS MODE
You will need to complete these steps
for each option ie.
or
Answer Only
Press and hold the
to standby (HSET 1)
You must have already recorded your own
messages 1 & 2 (see page 18) to be able to
choose YOUR OGM.

Adjusting the volume of

ANS
played back messages
.
You can adjust the volume of message playback
at the base station. There are four settings:
HIGH, MEDIUM, LOW, SILENCE
Changes can only be made during:
•
Message playback
•
While incoming messages are being recorded
•
During Call Screening
To decrease the volume
Press the
Each press of the button decreases the
volume one step.
.
Answer and Record
.
button to return
REMINDER
.
button.
MEMO