Sec Code; Remote Access - BT SYNERGY 1400 User Manual

Remote Access

You can operate your answering machine from
any other external phone, providing it is a
Touchtone™ phone. To do this you need a
security code to prevent unauthorised access.
This code should not be confused with the
separate Synergy PIN number, which is required
for registering and de-registering handsets on
your Synergy 1400 base station.
Setting your Remote Access security
code from your Synergy handset
Your security code authorises you to
access your messages from any
Touchtone™ phone.
Press button once. Display shows
ANS PHONE
.
Press button. Display shows
OFF PLAY
or , if there are messages.
Press button several times until
SET-UP
appears.
Press button. Display shows
Press button several times until

SEC CODE

display reads
Press button. Display shows
1
with the flashing. This is the default
factory setting.
Please keep a reminder of your security code.
If you forget it at any time, simply repeat the
procedure opposite. It will permit the number
to be retrieved and/or changed.
ANS ON
To safeguard your messages you should only
give your security code to those who you wish to
ANS
have access. Incoming callers wanting to leave a
message will not need a code.
REC OGM
.
.
CODE - - 150
Enter your own number (between 000
and 999), overwriting the displayed
digits one at a time as each one flashes.
When your code is fully entered press
button. A confirming tone sounds.
Your security access code is now set.
Press and hold button. Handset
display returns to standby.
PLEASE NOTE
PLEASE NOTE
29