Call Screening - BT SYNERGY 1400 User Manual

The light goes out.
In-Use
The Talk symbol
The incoming message is tagged with the day
and time it was received.
The handset message symbol
for the first time, if this is the first message to be
recorded.
The message symbol will already be on the display
if earlier unplayed messages are still stored.
Message Alert, if switched on, will sound on the
base station.

Call Screening

When the answering machine is switched on,
you can hear incoming calls at the base station
and SCREEN is displayed on the LCD, you may
decide whether to answer them or let your
Synergy 1400 take the message. If you decide to
answer the call, the answering machine will stop
when you pick up any handset from the base or
charging station (or press the
allow you to speak direct to the caller.
If you want to carry on screening the call you
must press the
handset from the base station or pressing the
button (if the handset is away from the
TALK
base station). Once you have pressed the
button the display shows
the call at the handset but the caller cannot hear
you. To take the call press the
PLEASE NOTE
The screen functions will also work when the
answer machine is off.
24
disappears.
is displayed
button) and
TALK
button before either lifting the
SCREENING
. You can hear
button.
TALK
Memos
Use the facility to leave messages for
MEMO
members of your household or office
colleagues. Memos can be recorded from both
handset and base station.
To record a memo from the handset
Press buttons in order shown
Press button once. Display shows
ANS PHONE
.
Press button. Display shows
PLAY
or , if there are messages.
Press button until
Press button. Display shows
after 2 seconds the voice says 'Please
speak after the tone. To end recording
press End' (i.e.
Display shows
A tone sounds to signal the start of
recording.
Leave your message, pressing
at the end. A tone sounds and
disappears from the display.
MEMO
reappears. The message is tagged
with day and time.
Handset display shows the message
symbol.
Both handset and base station displays
show the new message total.
ANS ON OFF
MEMO
appears.
PLS LISTEN,
).
END
and .
button
END