Table of Contents
Advertisement
34
Answer Machine
Time saver
When you ring in to access your
answer machine remotely, if
you have set Time saver as the
answer delay and you have new
messages it will answer after
4 rings. If you don't have new
messages it will answer after 6
rings. This means you can hang
up knowing that you have no
new messages, saving you the
time and the cost of the call.
For compatibility with BT 1571
(or another voicemail service)
Make sure the answer delay is
set for your answer machine
to answer before the voicemail
service. Therefore, the answer
delay should be less than on
your voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.
Set the answer mode (Answer & Record or
Answer Only)
1. Follow steps 1 to 2 in 'Record your own outgoing
message' on page 33.
2. ANSWER MODE is displayed, press
3. Press
mode you want: ANS & REC or ANSWER ONLY and
press
Set the answer delay
The answer delay setting sets how many times the
phone will ring before the answer machine takes the
call. You can choose from 2-8 rings or Time saver.
The default setting is 4 rings.
1. Press
2. Press
3. Press
4. Press
want (2–8 rings or Time saver) and press
save your new setting.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
or
to display the outgoing message
. You will hear a confirmation tone.
, ANS. MACHINE is displayed, press
until TAM SETTINGS is displayed, press
to display ANSWER DELAY and press
or
to display the number of rings you
.
.
.
.
to
Advertisement
Table of Contents
