Help - BT SYNERGY 1400 User Manual

Help

EMERGENCY CALLS
The emergency services can be contacted in the
UK by dialling 999 or 112 which is valid in
any country that is a member of the European
community.
PLEASE NOTE
If your Synergy 1400 is connected to a
switchboard/PBX, you may have to dial an
access number before 999 to contact the
emergency services. Some switchboards cannot
dial out during a power failure.
LCD Displays
Means handset is not
REG
C A L L D I V E R T
registered to the base.
See page 46 for handset
registering.
The ringer volume has been
SILENT
C A L L D I V E R T
set to off. See page 11.
The handset is in registration
PLS WAIT
C A L L D I V E R T
mode and searching for the
base station. See page 52.
The handset is registered to a
HSET
C A L L D I V E R T
base other than Synergy.
Shows that you are in the
SHARED
C A L L D I V E R T
memory function. See page 12.
Keypad guard is on.
GUARD ON
C A L L D I V E R T
Replacing handset battery
After a time, you may find that the handset
battery is running out of charge more quickly.
This is a standard sign of wear and the battery
will need replacing.
Spare batteries (Item Code 871285) are available
from BT Shops and the Synergy 1400 Helpline
.
0845 650 20 20
Do not immerse batteries in water or throw them
into a fire, or dispose of them with ordinary
domestic refuse.
BT accepts no responsibility for damage caused
to your Synergy handset by using any other type
of battery.
No display appears
The battery may be flat or dead. Recharge or
replace the battery.
No dial tone
Is the Synergy 1400 telephone line cord plugged
into the phone socket?
Check that the base station is connected to the
mains power and switched on.
55