Time - BT SYNERGY 1400 User Manual

Setting up your Synergy 1400
answering machine
You will need to use your Synergy handset to set
up the answering machine's basic functions.
To set Day and Time
Press buttons in order shown
Your Synergy 1400 is supplied with
factory-set defaults for day and time:
Sat 12:01 pm.
Press
ANS PHONE
Press
OFF PLAY
, or
Press
ANS SET-UP
Press
Press
is displayed.
Press
DAY = SAT
is currently set).
Press
days of the week until the required day
is shown.
Press
sounds. Display stops flashing and

TIME

shows
Press
The time can now be set.
16
button once. Display shows
.
ANS ON
button. Display shows
, if there are messages.
button several times until
is displayed.
REC OGM
button. Display shows
button several times until
button. Display flashes. Shows
(or whichever day of the week
button to scroll through the
button. A confirmation tone
.
button again.
Display shows the time
The first digit on the left flashes,
indicating that it is the first digit to be
changed or confirmed (confirm by
pressing the same digit on the button
pad).
Using the 24 hour clock, enter the time
in hours and minutes, starting from the
left.
After you have entered the first digit it
will stop flashing. The next digit then
starts flashing. Repeat the process until
the correct time shows.
Press
sounds.
Display shows time set and returns
TIME
to .
Press the
SET-UP or press and hold the
.
for 2 seconds to return to standby.
DAY
T HHMM
= .
button. Confirmation tone
button to return to ANS
button