Call screening
Via the base:
You can listen to a caller leaving a message via the base speaker.
Once they start leaving a message if you decide you want to speak
to the caller simply pick up the handset and answer the call.
Via the handset:
When a caller is leaving a message
the display.
Pressing
allows you to monitor the message being left through
the handset earpiece without the caller hearing you.
You can then press
Operating the answer machine via
the handset
Switch answer machine on/off
When first connected to the mains power, your BT Xenon 1500 is
set to ON and Answer and Record.
When set to on, the
1. Press the Menu button, the display shows
press
.
2. Press
or
to select.
3. Press
or
to confirm.
4. Press and hold
Outgoing messages
This is the message your caller hears when the answering
machine picks up their call. Your BT Xenon 1500 comes with
two pre-recorded male and female outgoing messages to choose
from. You can also record your own outgoing messages.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
SCREENING?
to accept the call or
icon is displayed on the handset screen.
until
is displayed and press
ANS ON/OFF
to select
or
ON
OFF
to return to standby mode.
appears on
to stop monitoring.
,
ANS MACHINE
, then press
32