Oven Ceiling - Electrolux EKC6051FO User Manual

Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point to
the front!
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.

10.2 Oven Ceiling

You can fold down the heating element
on the oven ceiling to clean the oven ceil-
ing easily.
WARNING!
Before you fold down the heating
element switch off the appliance.
Make sure that the appliance is
cold.
There is a risk of burns!
Folding down the heating element
1.
Remove the shelf support rails.
2. Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring
pressure and out along the support
on both sides.
4. The heating element folds down.
The oven ceiling is ready to clean.
Installing the heating element
1. Install the heating element in opposite
sequence.
Install the heating element cor-
rectly on the two sides above the
support on the inner wall of the
oven.
2. Insert shelf support rails.
10.3 Cleaning the oven door
To make the cleaning easier, remove the
door.
WARNING!
Make sure that the glass panels
are cool before you clean the
glass door. There is a risk that the
glass could break.
WARNING!
When the door glass panels are
damaged or have scratches, the
glass becomes weak and can
break. To prevent this, you must
replace them. For more instruc-
tions, contact your local Service
Centre.
ENGLISH 23