Printer Settings; Substitute Tray; Paper Priority - Xerox DocuPrint 240A User Manual

Printer Settings

[Printer Settings] menu is used to make settings for paper trays such as the auto tray
selection feature.

Substitute Tray

Specifies whether to print on paper loaded in another tray when there is no paper left in the
tray selected by the auto tray selection feature. If you want to replace paper, specify the
paper size.
[Off] (default)
Select this not to replace paper but display a message prompting you to load paper.
[Larger Size]
Select this to replace the paper with a larger size paper before printing in 100%
magnification ratio.
[Nearest Size]
Select this to replace the paper with the nearest size paper before printing. This may shrink
the images automatically as required.
Note
• If a computer issues the instruction about paper selection, it overwrites this setting.
Paper Type
Specifies the paper type to be loaded in trays. The default is [Plain] for all trays. The names
specified in [Paper Name] will be displayed for Customs 1 to 5.
Select from [Plain], [Recycled], [Heavyweight 1], [Heavyweight 2], [Transparency], and
[Custom 1] to [Custom 5].

Paper Priority

Specifies the priority of the paper type loaded in the tray specified with the auto tray
selection feature. The names specified in [Paper Name] will be displayed for Customs 1 to
5.
Plain, Recycled, Heavyweight 1, Heavyweight 2, Custom 1 to Custom 5
Select the priority of each paper type from [Not Selected] and [1] to [9]. You can specify the
same priority for different paper types. In this case, the paper tray is selected based on the
settings in [Tray Priority]. If you set [Not Selected] for a paper type, the tray loaded with the
paper type will be excluded from the targets of auto tray selection. The default is [1] for plain
paper, [2] for recycled paper, and [Not Selected] for the others.
Refer to
• "Automatic Tray Selection" (P. 60)
88
4 Settings on the Control Panel