Xerox DocuPrint 240A User Manual page 92

LPD Spool, SMB Spool
[Off] (default)
Select this if you do not want to perform spool processing. When the LPD or SMB data from
a computer is being processed, data from another computer cannot be received via the
same interface.
For LPD, specify the LPD specific receive buffer memory capacity between 64 and 1024 KB
(1024 and 2048 KB when the mounted RAM is 256 MB or more) in increments of 32 KB.
The default is [1024K].
For SMB, specify the SMB specific receive buffer memory capacity between 64 and 1024
KB in increments of 32 KB. The default is [256K].
[Hard Disk]
Select this to perform spool processing. This uses the hard disk (optional) as the receive
buffer for spool processing. This item is displayed when the hard disk is installed.
[Memory]
Select this to perform spool processing. This uses the memory as the receive buffer for
spool processing.
If you select this option, specify the receive buffer memory capacity for spool processing
between 0.5 and 32.00 MB in increments of 0.25 MB. The default is [1.00 M]. Note that the
printer cannot receive data that is larger than the specified memory capacity. In this case,
select [Hard Disk] or [Off].
Important
• If LPR byte count is disabled in Windows 2000 and you send a document whose size is larger than the
spool memory capacity, the computer will repeatedly try to send the job. To stop this, open the [Port] tab
from the propeties dialog box of the printer driver to enable the LPR byte count or change the memory
spool capacity to a value larger than the document size.
IPP Spool
[Off] (default)
Select this if you do not want to perform spool processing. When IPP data from a computer
is being processed, data from another computer cannot be received via the same interface.
Specify the IPP specific receive buffer memory capacity between 64 and 1024 KB in
increments of 32 KB. The default is [256K].
[Hard Disk]
Select this to perform spool processing. This uses the hard disk (optional) as the receive
buffer for spool processing.
Note
• [IPP Spool] is displayed when the hard disk (optional) is installed. [IPP Memory] is displayed when the
hard disk is not installed.
92
4 Settings on the Control Panel