Xerox DocuPrint 240A User Manual page 118

Print instructions from multiple
computers are sent to the
printer at the same time.
Printing files cannot be spooled
due to insufficient disk capacity
of the computer.
For Windows NT 4. 0/Windows 2000/Windows XP/Windows Server 2003
When the Printer Is Not Printing
Incorrect IP address.
When [LPD Spool] is set to
[Memory], the print data sent
from a computer in a single print
instruction has exceeded the
upper limit of the receiving
capacity.
An irrecoverable error has
occurred during printing.
The transport protocol is
different from that of the
computer.
118
5 Troubleshooting
Cause
"Unable to print (NetworkError)"
is displayed.
"Unable to print (SpoolError)" is
displayed. Double-click [My
Computer] and right-click the
disk (example: C drive) installed
with Windows 95, Windows 98,
Windows Me. Select
[Properties] from the menu
displayed and then check the
free space available.
Cause
Ask your network administrator
to check that the IP address is
correct.
Check the memory capacity of
[LPD Spool] and compare it with
the print data which was sent in
the single print instruction.
Check if an error is displayed on
the control panel.
Check the selected transport
protocol.
Verification
None (Printing will be resumed
automatically).
After deleting unnecessary files
to increase the free space
available, select [Pause
Printing] from the [Documents]
menu of the printer window to
enable printing to restart.
Verification
Specify the correct IP address
for the printer.
1.
2.
Switch off and then on the
printer.
Select the same transport
protocol as that of the computer.
Action
Action
If a single file of print data
has exceeded the upper
limit of the memory
capacity, divide the file into
smaller ones and try again.
If multiple files have
exceeded the upper limit of
memory capacity, reduce
the number of files to be
sent at one time.