Tray Priority; Job Offset - Xerox DocuPrint 240A User Manual

Tray Priority

Specifies the priority of trays 1 to 4 for auto tray selection when the optional trays are
installed.
1 to 3
Set each tray to any of [1] to [3]. You cannot set the same tray for each priority number. That
means the trays that can be set [2] are other than the tray specified in [1], and the trays that
can be set [3] are other than the trays specified in [1] and [2]. The remaining trays are set
to [4]. The default priority is tray 1 (highest priority) to tray 4 (lowest priority).
Paper Size
Specifies the paper size to be loaded in trays.
Note
• For details on the paper sizes available for each tray, refer to "Usable Paper" (P. 54).
Tray 1 to Tray 4
[Auto] (default)
Select this to load the standard size paper.
[Custom]
Select this to load the custom size paper and specify the [Portrait (Y) Size] and [Landscape
(X) Size] in increments of 1 mm (0.1").
Paper Name
You can change [Custom 1] to [Custom 5] displayed in [Paper Priority] and [Paper Type] to
any names.
Custom 1 to Custom 5
Specify up to 12 alphanumeric characters.

Job Offset

Specify how to perform offset output. This setting is only available when the offset catch tray
(optional) is installed.
[Offset Per Set] (default)
When printing multiple copies, each set of document is output with its position shifted per
set.
[Offset Per Job]
Select this to output the document with its position shifted per job.
[Off]
Select this if you do not want to perform offset output.
Print ID
Select this to print the user ID on a specified position.
The default is [Off].
Odd Page 2 Sided
Specifies whether to perform 1 sided printing or 2 sided printing for the first page when the
total number of pages is an odd number. This setting is only available when the duplex unit
(optional) is installed. The default is [1 Sided].
* No.1 to 3 characters of 4 are available (refer to P. 94)
4.2 Description of Menu Items
89