Settings On The Printer Driver - Xerox DocuPrint 240A User Manual

Settings on the Printer Driver

The procedure here explains with Windows XP as an example.
1. Set the port that is used when installing to COM n (n=1, 2, 3,...).
2. After installation, click [Start] on the taskbar, then select [Printers and Faxes].
3. Click the icon of this printer, and then select [Properties] from the [File] menu.
4. Click the [Ports] tab to confirm the port that is specified when installation is set, then
click [Configure Port].
5. Set each item.
Bits per second: Select the value of Baudrate that is set on the printer.
Data bits:
Parity:
Stop bits:
Flow control:
6. Click [OK].
7. Click [OK] in the printer properties dialog box.
Select [8].
Select the value that is set on the printer.
Select the value that is set on the printer.
Select [None] when the flow control is not enabled. Select [Xon/Xoff]
when setting [Xon-Xoff Control] to [On] on the printer. Select
[Hardware] when setting [DTR Control] to [Active-High] on the printer.
A.7 Printing Using the Serial Interface
155