Paper Tray - Xerox DocuPrint 240A User Manual

Layout
Select this to set the print layout.
Note
• This item will not be displayed when [PS] has been selected for [Process Mode].
[Auto %] (default)
Select this to automatically set the magnification percentage so that the magnification ratio
to the paper size for printing will become the largest. Based on the document size of the
PDF file, the printer will determine whether it is A4 or letter size before printing.
[100% (No Zoom)]
Select this to print documents in the original size regardless of the paper size used for
printing.
[Booklet]
Select this to print the pages on both sides of the paper and arranged like a booklet
according to the page structure of a PDF file. However, booklet printing may not be available
depending on the page structure. In this case, [Auto %] is set before printing.
Note
• If the duplex unit (optional) is not installed, documents are printed on 1 side.
• If [A4] has been set for [Output Size], the document will be printed on A4 size paper.
• If [Auto] has been set for [Output Size], the document will be printed on A4 size paper.
[2 Up]
Select this to arrange and print two pages on a single sheet of paper. When [4 Up] is
selected, the paper size is fixed to A4.
[4 Up]
Select this to arrange and print four pages on a single sheet of paper. When [4 Up] is
selected, the paper size is fixed to A4.
PCL
Sets the PCL emulation mode.

Paper Tray

Specifies the paper tray to be used for printing.
The candidate values are as follows:
[Auto] (default)
This searches for the tray loaded with the paper size specified in [Output Size] and
automatically feeds paper from it.
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
Important
• If any tray from [Tray 1] to [Tray 4] is selected, the paper size loaded in the tray will become the paper
size for printing.
Note
• If [Auto] is selected and paper of the same size is loaded in multiple trays in the same direction, paper
will be fed from the tray specified as higher priority in [Tray Priority] under [Printer Settings] of Admin
Menu. The default of [Tray Priority] is Tray 1 (highest priority) > Tray 2 > Tray 3 (optional) > Tray 4
(optional) (lowest priority). If paper of the same size is loaded in multiple trays in different directions,
paper loaded in landscape direction will be used first.
• [Tray 3] and [Tray 4] will not be displayed when those optional trays are not installed.
4.2 Description of Menu Items
71