Selecting A Destination From The Job Log - Oce cm6520 User Manual

3
3
Touch the button for the desired destination, and then touch [OK].
– To cancel a selection, touch the button for a selected destination again.
4
Touch [Close].

Selecting a destination from the job log

Follow the procedure described below to select a destination from the job log.
Note
This feature is not available with Internet faxing or IP address faxing.
1
Touch the Job History tab.
The Job History list appears.
2
Select the desired destination.
– The last five destinations where a transmission was sent are displayed.
– To cancel a selection, touch the button for a selected destination again.
3-8
Using fax/scanning functions
cm6520