Oce cm6520 User Manual page 74

Using fax/scanning functions
3
Specify the destination.
– For details on specifying destinations, refer to page 3-5.
– To erase the entered destination, press the [C] (clear) key.
4
Specify the necessary scanning settings.
– For details on specifying scanning settings, refer to page 3-14.
– To cancel the setting and select the default, press the [Reset] key.
5
Press the [Start] key.
– If the machine is set to display the transmission result report screen, a
screen appears, requesting confirmation to print the transmission result
report. To print the transmission result report, touch [Yes], and then
touch [OK].
– To stop the transmission, press the [Stop] key.
Scanning of the document begins, and then the fax is sent.
cm6520
3
3-3