Oce cm6520 User Manual page 43

2
3
Touch the button for the desired settings, and then touch [OK].
– If "1 > 2" or "2 > 2" is selected, touch [Output Bind Direction], select the
binding position for the copy, and then touch [OK].
– If the binding position for the copy is set to "Auto", the binding position
is set at the top or on the left side. The binding position is automatically
determined according to the orientation of the loaded document. If the
document length is 11-11/16 inch (297 mm) or less, a binding position
along the long side of the paper is selected. If the document length is
more than 11-11/16 inch (297 mm), a binding position along the short
side of the paper is selected.
4
Touch [Close].
The Basic screen appears again.
2-14
Using copy functions
cm6520