Table 8: Ucm6102 Network Settings - Grandstream Networks UCM6102 User Manual

Identity
MD5 Password
802.1X Certificate
802.1X Client
Certificate
Settings -> Network Settings -> WAN
IP Method
IP Address
Gateway IP
Subnet Mask
DNS Server 1
DNS Server 2
User Name
Password
Preferred DNS Server
Settings -> Network Settings -> LAN
Mode
IP Address
Subnet Mask
DHCP Server Enable
DNS Server 1
DNS Server 2
Allow IP Address
From
Allow IP Address To
Default IP Lease Time
Settings -> Network Settings -> 802.1X
802.1X Mode
Firmware Version 1.0.0.32
•
EAP-TLS
•
EAP-PEAPv0/MSCHAPv2
Enter 802.1X mode identity information.
Enter 802.1X mode MD5 password information.
Select 802.1X certificate from local PC and then upload.
Select 802.1X client certificate from local PC and then upload.

Table 8: UCM6102 NETWORK SETTINGS

Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
Enter the IP address for static IP settings.
Enter the gateway IP address for static IP settings.
Enter the subnet mask address for static IP settings.
Enter the DNS server 1 address for static IP settings.
Enter the DNS server 2 address for static IP settings.
Enter the user name to connect via PPPoE.
Enter the password to connect via PPPoE.
Enter the preferred DNS server address.
Select LAN port mode as Router or Switch.
Enter the IP address assigned to the LAN port.
Enter the subnet mask.
Enable or disable DHCP server capability.
Enter DNS server address 1.
Enter DNS server address 2.
Enter the IP Pool starting address.
Enter the IP Pool ending address.
Enter the IP lease time (in seconds).
Select 802.1X mode. The default setting is "Disable". The supported 802.1X
mode are:
•
EAP-MD5
UCM6102/6104/6108/6116 USER MANUAL Page 24 of 108