Protocol Type
Port
Once the change is saved, the web page will be redirected to the login page using the new URL. Enter the
username and password to login again.
EMAIL SETTINGS
The Email application on the UCM6102/UCM6104/UCM6108/UCM6116 can be used to send out Emails to
users with Fax (e.g., Fax-To-Email), Voicemail (Voicemail-To-Email) and other information as attachment.
The configuration parameters can be accessed via Web GUI->Settings->Email Settings.
TLS Enable
Type
Domain
TIME SETTINGS
The current system time on UCM6102/UCM6104/UCM6108/UCM6116 can be checked under Web
GUI->Status->System Status. To change the time settings, go to Web GUI->Settings->Time Settings.
NTP Server
Enable DHCP Option 2
Firmware Version 1.0.0.32
is enabled, the access using HTTP with Port 80 will be redirected to
HTTPS with Port 8089. The default setting is "Enable".
Select HTTP or HTTPS. The default setting is "HTTPS".
Specify port number to access the HTTP server.
Table 11: Email Settings
Enable or disable TLS during transferring/submitting your Email to other
SMTP server. The default setting is "Yes".
Select Email type.
•
MTA: Mail Transfer Agent. The Email will be sent from the
configured domain. When MTA is selected, there is no need to set
up SMTP server for it or no user login is required. However, the
Emails sent from MTA might be considered as spam by the target
SMTP server.
•
Client: Submit Emails to the SMTP server. A SMTP server is
required and users need login with correct credentials.
Specify the domain name to be used in the Email.
Table 12: Time Settings
Specify the URL or IP address of the NTP server for the PBX to
synchronize the date and time. The default NTP server is
ntp.ipvideotalk.com.
If set to "Yes", the device is allowed to get provisioned for Time Zone
UCM6102/6104/6108/6116 USER MANUAL
Page 31 of 108