Change Password; Ldap Server - Grandstream Networks UCM6102 User Manual

•
•
•
Check the box to display advanced options.
•
Advance
•
Click on "Apply" button to save the change and then submit by clicking on "Apply Changes". The new rule
will then display at the bottom of the page. Users can select
rule.

CHANGE PASSWORD

After login the Web GUI for the first time, it is highly recommended for users to change the default password
"admin" to more complicated password for security purpose. Follow the steps below to change the Web
GUI access password.
•
Go to Web GUI->Settings->Change Password page;
•
Enter the old password first;
•
Enter the new password and retype the new password to confirm. The new password field has to be at
least 5 characters;
•
Click on "Save" and the user will be logged out;
•
Once the web page comes back to the login page again, enter the username "admin" and the new
password to login.

LDAP SERVER

The UCM6102/UCM6104/UCM6108/UCM6116 has an embedded LDAP server for users to manage
corporate phonebook in a centralized way. By default, the LDAP server has generated the phonebook
based on the created extensions already. If users have the Grandstream phone provisioned by the
UCM6102/UCM6104/UCM6108/UCM6116, the LDAP directory has been set up on the phone and can be
used right away. Or users could manually configure the LDAP client settings accordingly to manipulate the
built-in LDAP server on the PBX.
Firmware Version 1.0.0.32
TFTP
HTTP
LDAP
Source
Enter the source IP address and port.
Destination
Enter the destination IP address and port.
UCM6102/6104/6108/6116 USER MANUAL
to edit the rule, or select
Page 27 of 108
to delete the