Factory Setting
To reset the receiver to default setting, go to the menu accessories.
Select the menu point Factory Setting.
To confirm press OK.
Select Yes if you really want to reset the receiver to default setting.
Select No if you want to keep the settings of the receiver.
For leaving the menu, press EXIT once or repeatedly.
SatcoDX Auto Programming
To start the SatcoDX Auto Programming, go to the menu Tools.
Select the menu point SatcoDX Auto-Programming.
To confirm press OK.
Start the programming with the OK button.
For leaving the menu, press EXIT once or repeatedly.
SW Upgrade by OTA
To upgrade the software of the receiver over satellite, go to the menu Tools.
Select the menu point SW Upgrade by OTA.
To confirm press OK.
Select the parameter Satellite, Transponder, Frequency, Symbol Rate,
Polarisation and Download PID with the PR (+/-) and VOL (+/-) buttons.
Select the menu point Start.
Start the Update with the OK button.
For leaving the menu, press EXIT once or repeatedly.
Smart MX 04
Tools
EN
45