Tp List; Network Search; Scan Mode - SMART MX 04 User Manual

Installation

Network Search

Select the menu point Network Search in menu Multi Satellite Search
on page 27. This menu point is only active when you have selected
Preset Scan.
If you want to search with network search, then select Yes.
Otherwise select No.

Scan Mode

Select the menu point Scan Mode in menu Multi Satellite Search on
page 27.
Select the search mode Preset Scan or Blind Search.
Search
Select the menu point Search in menu Multi Satellite Search on page 27
Press OK to start the search run.

TP List

To select the transponder list, go to the menu Installation on page 22.
Select the menu point TP List.
To confirm press OK.
To edit the TP List, press Find.
To add a transponder, press ZOOM.
To delete a transponder, press TXT.
To search a transponder, press Audio.
For leaving the menu, press EXIT once or repeatedly.
28 EN Smart MX 04