System Setup; Language - SMART MX 04 User Manual

System Setup

Press MENU.
Select the menu point System Setup.
To confirm press OK.

Language

Figure 8: menu for language settings
Language
The menu language is set when the receiver was stared for the first time (see
chapter Start Operating The Receiver, page 16).
To change the menu language, go to the menu System Setup.
Select the menu point Language.
To confirm press OK.
Select with VOL (+/-) the desired language.
To confirm press OK.
For leaving the menu, press EXIT once or repeatedly.
Smart MX 04
System Setup
EN 29