Settings And Operations; Basic Setting; Lnb Power - SMART M1 Plus User Manual

Basic Setting

If it is first time using a receiver, you
should set parameters for system
configuration.
Refer to the following section.
1. Turn on your TV and Satellite receiver.
2. Press the MENU button, main menu
screen will appear as shown below.
<LNB Power>
1. Select Installation on the Main Menu.
2. Select LNB Power.
3. If LNB Power is independently
supplied from outside source, set the
LNB Power OFF. Otherwise set it ON.
4. After completion of LNB Power setting,
go back to Installation menu by pressing
MENU.

Settings and Operations

12