Settings
In the line Tuner Loop-through you can set whether the antenna signal which is
present in the "ANT IN" socket should be looped through the receiver and then
be present in the "LOOP-OUT" socket with the
6.3.4
Factory setting
In this menu you can reset all of the settings of the receiver to factory settings.
Enter the password.
Confirm the security question.
6.3.5
System information
This menu displays which status the stored software has.
There are no setting possibilities available in this item.
6.3.6
Child Protection
In this menu you can set a new password.
Enter the previous password.
Enter the new password.
Confirm the new password once again.
Please note the new password somewhere. In an
6.4
Time
Activate or deactivate the automatic time setting with the
If AUTO is set, the current time will automatically be transmitted to your
receiver. You only have to set the corresponding time zone and activate and/or
deactivate the summer time.
If Manual is set, you have to manually enter the time and date.
6.5
Timer
In this menu, various events can be set up, edited and/or deleted.
46
The password in the as-received condition is pre-set as
0000.
If you want to assign a new password:
emergency please call the smart-service hotline.
and
buttons.
and
buttons.
smart MX52