Manual Updating Of The Raps List; Change Raps Settings Belated - SMART MX 04 User Manual

RAPS
Select the menu point RAPS Scanning with the PR (+/-) buttons.
Activate the option off with the VOL (+/-) buttons.
Leave the menu by pressing EXIT several times.
If you selected off, the flash „checking RAPS data" will not be visible any more
and the receiver will go directly to the last channel list.

Manual Updating Of The RAPS List

If you have switched off the automatic updating of the RAPS list, you can
search manually for an update.
Press MENU.
Select the menu accessories with the PR (+/-) buttons.
Confirm your selection with OK.
If necessary, insert the code.
Note!
The default code is "0000".
Select the menu RAPS System with the PR (+/-) buttons.
Confirm your selection with OK.
Select the menu point RAPS Mode with the PR (+/-) buttons.
Activate the option Update with the VOL (+/-) buttons.
Select the menu point Start with the PR (+/-) buttons.
Confirm your selection with OK.
The current settings for RAPS will now be shown and the receiver is checking
for an updated RAPS list. If the data for RAPS Date Receiver (list on your
receiver) and Date (current list) are different, the RAPS list has been changed.
In this case the update starts automatically.
If there is no change in the RAPS list, the receiver reports no change. .
Press OK and confirm by pressing again OK to get back to programming
mode.

Change RAPS Settings Belated

If you want to change the RAPS settings (for example hidden languages), act
as follows:
Press MENU.
Select the menu accessories with the PR (+/-) buttons.
54 EN Smart MX 04