Multi Satellite Search - SMART MX 04 User Manual

Network Search
Select the menu point Network Search in menu Single Satellite Search
on page 26. This menu point is only active when you have selected
Preset Scan.
If you want to search with network search, then select Yes.
Otherwise select No.
Scan Mode
Select the menu point Scan Mode in menu Single Satellite Search on
page 26.
Select the search mode Preset Scan or Blind Search.
Search
Select the menu point Search in menu Single Satellite Search on
page 26.
Press OK to start the search run.

Multi Satellite Search

To search channels on several satellites, go to the menu Installation on
page 22.
Select the menu point Multi Satellite Search.
Confirm with OK. At the bottom of the menu you can see the satellites on
which the channels will be searched.
For leaving the menu, press EXIT once or repeatedly.
Satellite
Select the menu point Satellite in menu Multi Satellite Search.
To confirm press OK.
Select a satellite from the list.
To confirm press OK.
Scan Channel
Select the menu point Scan Channel in menu Multi Satellite Search on
page 27.
If you only want to search for TV channels, then select TV Channels.
If you want to search for radio channels, then select Radio.
If you want to search for TV and radio channels, then select TV + Radio.
Smart MX 04
Installation
EN 27