Motor Setting - SMART MX 04 User Manual

Installation
Delete All
To delete the saved satellite positions, go to the menu Installation on
page 22. This menu point is only active when antenna setup is set on
DiSEqC 1.2 (see chapter Motor Type, page 23).
Select the menu point Antenna Setup.
To confirm press OK.
Select the menu point Delete all.
To confirm press OK.
If you really want to delete all settings, select Yes and confirm with the
OK button.
If you do not want to delete the settings, select No press the OK button.
For leaving the menu, press EXIT once or repeatedly.

Motor Setting

To change the motor settings, go to the menu Installation on page 22.
Select the menu point Antenna Setup.
To confirm press OK.
Select the menu point Motor Setting.
To confirm press OK.
At the bottom of the menu you can see two progress bars for signal strength
and signal quality.
Satellite
Select the menu point Satellite.
To confirm press OK.
Select the satellite which position you want to setup.
To confirm press OK.
Transponder
Select the menu point Transponder.
To confirm press OK.
Select a transponder.
To confirm press OK.
Pos.No. & Save
Select the menu point Pos.No. & Save.
Select a position number.
24 EN Smart MX 04