SMART MX 04 User Manual page 55

Confirm your selection with OK.
If necessary, insert the code.
Note!
The default code is "0000".
Select the menu RAPS System with the PR (+/-) buttons.
Confirm your selection with OK.
Select the menu point RAPS mode with the PR (+/-) buttons.
Activate the option configure with the VOL (+/-) buttons.
Select the menu point start with the PR (+/-) buttons.
Confirm your selection with OK.
You can see the menu fort he RAPS update on the screen.
Make the RAPS settings like mentioned in chapter Install or update on
page 47.
Smart MX 04
RAPS
EN 55