Activate And Deactivate The Automatical Checking Of The Raps List - SMART MX 04 User Manual

You can now see a list of languages of the screen and you can select each
language separately.
Press the PR (+/-) buttons to mark a language.
Confirm your selection with OK.
The field behind the selected language will be checked now.
Repeat these steps for all languages with shall be hidden.
At last press the VOL-+-Taste to get to the next step.
To select all languages, press Find.
To delete all checks from the list, press ZOOM.
At last press the VOL-+-Button.
All Settings will now be saved.
Activate And Deactivate The Automatical Checking Of
The RAPS List
Figure 26: RAPS Data checking
RAPS will check after each switching-on if there is an updated RAPS list with
modified channel data. This will last about 15 seconds.
Press EXIT to stop the checking.
If you do not want to use the automatical update function, act as follows:
Press MENU.
Select the menu accessories with the PR (+/-) buttons. Confirm your
selection with OK.
If necessary, insert the code.
Note!
The default code is "0000".
Select the menu RAPS System with the PR (+/-) buttons.
Confirm your selection with OK.
Smart MX 04
RAPS
EN 53