Install Or Update Raps Automatically - SMART MX 04 User Manual

be changed by the new RAPS list. Furthermore you can deactivate RAPS at
any time with default reset.
RAPS gives you plenty of rope here.

Install or update RAPS automatically

Note!
Scanning for new RAPS lists will only be made in TV mode.
Switch to TV mode to search manually for a new RAPS list or
make later configuration changes of your RAPS system.
The RAPS list will only be transmitted when you receive
Astra 19,2°.
When you use RAPS only the channel list will be updated.
Favourite lists established by you will remain unaffected.
To activate RAPS on your receiver, reset it to default or select RAPS
under MENU -> SOFTWARE VERSION.
After default reset you have to select the menu language.
In the following menu you can choose if you want to use RAPS or not.
If you want to use RAPS, select the option yes with the PR (+/-) buttons.
Press OK.
The receiver will now search for the updated RAPS list.
Figure 16: Automatic programming
Smart MX 04
RAPS
EN 47