Connecting The Tv-Set; Connecting A Dolby-Digital Device; Operation - SMART MX 04 User Manual

Connecting The Receiver

Connecting The TV-Set

Connect your TV-Set with the Scart output for TV. Alternatively you can also
use the connectors AUDIO-L, AUDIO-R and VIDEO.
If the receiver has a modulator, you can connect the RF-OUT of the receiver
with the antenna input of the TV-Set. If you want to receive programs as well
via the house antenna, you must connect the RF-IN socket of the receiver with
the antenna socket in your house.
When all antenna cables are connected, you can select a free channel on your
TV-Set and start the channel search. Please look for details in the user
manual of your TV-Set.
The output channel of the modulator is pre-set to channel 38.

Connecting A Dolby-Digital Device

If you want to connect a Dolby-Digital device, you can connect it with a coaxial
cable to the digital output (SPDIF) of the receiver. For connecting to the Dolby-
Digital device please read its user manual.

Operation

After connecting all devices, you can plug in the mains supplies of all
connected devices and switch them on.
Smart MX 04 EN 15