Inserting Of Batteries; Replacing Of Batteries; Safety Instructions - SMART MX 04 User Manual

Inserting Of Batteries

Figure 3: Inserting of batteries into the remote control
Open the battery compartment on back side of remote control. Insert two
batteries type AAA according to polarities mentioned on the battery
compartment. Push the cover of the battery compartment carefully till the
cover is locked.

Replacing Of Batteries

Replace discharging batteries on time. Always replace both batteries
simultaneously and use batteries of the same type.

Safety Instructions

Attention!
Do not recharge or destruct normal batteries. Do not throw
them into fire.
Batteries may contain toxic agents that are hazardous to
health and environment. Therefore, dispose of the batteries
immediately according to the prevailing statutory regulations.
Never throw the batteries in normal household waste.
Note!
Always insert the batteries according to their polarities.
Batteries which are getting discharged may damage the
remote control. If you do not use the receiver for a longer
period of time, remove the batteries from the remote control.
Smart MX 04
Remote Control
EN 13