Indoor Air-Cooled Centrifugal Fan Condensing Unit Installation; Location Considerations; Electrical Connections; Figure 17 Close-Coupled Installation - Liebert Mini-Mate2 MMD24E User Manual

Figure 17 Close-coupled installation

5.6

Indoor Air-Cooled Centrifugal Fan Condensing Unit Installation

5.6.1

Location Considerations

The centrifugal fan air-cooled condensing unit may be located above the dropped ceiling or any remote
indoor area. If noise is of concern, the condensing unit should be located away from personnel. Normal
operating sound may be objectionable if the condensing unit is placed near quiet work areas. Refer to
Table 9 for maximum refrigerant line lengths.
To mount the unit in the ceiling, refer to 5.5 - Installing the Ceiling Units.
5.6.2

Electrical Connections

Refer to 5.5.5 - Electrical Connections for general wiring requirement and cautions. Refer to the
unit's electrical schematic when making connections. Refer to the unit's specifications for full load
amp and wire size amp ratings.
® ™
Liebert Mini-Mate2
Line Voltage Electrical Power
Supply Entrance (Electric service
not by Emerson)
Evaporator
Evaporator Unit Electric Box
Single-Point Power Kit Option
Factory-supplied, field-installed
and field-wired
DPN000196
Rev. 0
30
Site Preparation and Installation
Close-Coupled
Centrifugal Air-Cooled
or Water/Glycol
Condenser
Condenser