Recording; Basic Recording; D-Vhs Recording Via I.link Connection - JVC HD-DH5US Instructions Manual

RECORDING

Basic Recording

•
Turn on the TV (and/or Digital Set Top Box), and
select the channel to be recorded.
•
Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
CASSETTE
LOADING [STOP(L)]
[POWER]
[EJECT(M)]
VCR CABLE
TV
/DBS
Number Keys
[REW (O)]
[REC (R)]
NOTES:
•
When a new D-VHS tape is inserted, "AUT" is always selected
regardless of the previous recording speed selected.
•
You can perform D-VHS recording of a program which is
timer-programmed on your Integrated HDTV (or Digital Set
Top Box) by using 'i.LINK Timer Programming' (
[CHANNEL +/–]
[REC SPEED]
[REC(R)]
[POWER]
[TV/VCR
CH+/ ]
[REC SPEED]
[PLAY (I)]
[FF (N)]
[PAUSE (W)]
[STOP (L)]
A
page 48).
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
In addition, this VCR is equipped with the Video Navigation
function, which allows you to quickly locate the programs you have
recorded on a tape. When recording on this VCR, the tapes are
automatically numbered so that every tape recorded on this VCR
has a different tape number. With this function, the program
information such as recording date, start time, channel number, and
recording speed are also automatically stored in the VCR's memory.
•
For the Video Navigation function, see page 51. To
memorize the recording date and start time for the Video
Navigation function, the date and clock must be set correctly.

D-VHS Recording via i.LINK Connection

A
Set up link between this VCR and the
Integrated HDTV or Digital Set Top Box
• Select i.LINK connection at the Integrated HDTV or
Digital Set Top Box. For details, refer to the instruction
manual of the Integrated HDTV or Digital Set Top Box.
B
Load a D-VHS cassette
Make sure the record safety tab is intact. If not, cover the
hole with adhesive tape before inserting the cassette.
• The [D-VHS] LED on the front panel and [D-
VHS] indicator on the front display panel light
up and the D-VHS recording mode is enabled.
C
Select recording channel (i.LINK input)
On the front panel:
Press [CHANNEL +] or [–] to select "I-1" etc.
On the Remote:
Press [TV/VCR CH +] or [–] to select "I-1" etc.
• Set "LINC" to "AUTO". (A page 70)
• Confirm that a link has been established
between this VCR and the Integrated HDTV or
the Digital Set Top Box.
D
Set recording speed
Press [REC SPEED] to set the recording speed.
• The recording speed changes each time [REC
SPEED] is pressed.
"AUT": When recording in HS or STD mode
(AUTO) is selected automatically according
to the amount of data input (transfer
rate) of the program.
"HS": When picture quality and sound
quality are important.
"STD": When picture quality and recording
time are important.
E
Start recording
On the front panel:
Press [REC (R)].
On the Remote:
While holding [REC (R)], press [PLAY (I)].
35
EN