Squelch Delay; D Dtmf Speed - Icom ic-80fx Instruction Manual

D Squelch delay
Sets the squelch delay between short and long. The delay
prevents the squelch from repeatedly opening and closing
while continuously receiving a weak signal.
• Sqd. S : Sets the squelch delay to short.
• Sqd. L : Sets the squelch delay to long.

D DTMF speed

Selects a DTMF transfer speed.
• dtd. 1 : 100 milliseconds interval; 5.0 cps
• dtd. 2 : 200 milliseconds interval; 2.5 cps
• dtd. 3 : 300 milliseconds interval; 1.6 cps
• dtd. 5 : 500 milliseconds interval; 1.0 cps
(cps=characters per second)
D Dial assignment
Selects whether or not to use [VOL] as the
instead of [ ] and [ ]. When [VOL] functions as the
selector, [ ] and [ ] function as volume controls.
Option [VOL]
tOP.VO Volume control
tOP.dI Channel selector
D Simple mode
Inhibits the access to some functions. The operations and
modifications of Set mode items listed below are inhibited
while the Simple Mode function is turned ON.
Operation
Tone Squelch and Pocket Beep
Tone Scan
Setting skip channels
Priority Watch
Programming a channel name
8
SET MODES
selector
channel
channel
[ ]/[ ]
Channel selector
Volume control
Set mode modifi cation
Subaudible tone frequency
Tone squelch frequency
DTCS code
DTCS polarity
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
34