I Individual Call; When Receiving A Call - Icom IC-M801E Instruction Manual

8

WHEN RECEIVING A CALL

I Individual call

When receiving an Individual call, beeps may sound
(or the emergency alarm depending on the category)
and the display below appears.
Calling station's name appears when
the same ID is preprogrammed.
You must send back an acknowledgement to the call-
ing station in such cases.
q When "
push [ENT] to display the calling contents.
• The received call is selected in RX memory.
• Rotate [CH] to scroll text to see hidden lines informa-
tion.
w Push [ENT] for acknowledgement call preparation.
e Rotate [CH] to select that you can comply to the
call or not from "
push [ENT].
✔ When "
" is selected, go to step t.
Ç
✔ When "
enter the desired traffic frequency, then go to
step t.
r When "
[CH] to select the desired reason, then push [ENT].
Ç
36
" is displayed as above,
" and " ," then
" is selected, select or
" is selected in step e, rotate
t Push [CALL] for 1 sec. to transmit the Individual
acknowledgement.
• When " " or "
in step e.
" is selected in step e.
• When "
y After the transmission, the transceiver selects —
• The specified traffic frequency when "
" is selected in step e:
"
• The DSC watch mode when "
lected in step e.
" is selected
" or
" is se-