Making An Individual Call To An Ais Target - Icom IC-M510BB Instruction Manual

■ Making an Individual call to an AIS target

You can transmit an Individual call to a selected AIS target, without entering the target's
MMSI code. In this case, the call type is automatically set to Routine.
D Selecting an AIS target on the IC-M510BB
You can compose an Individual call to an AIS target selected on the Plotter screen or the
AIS list.
NOTE: The IC-M510BB can be input AIS information from the built-in AIS receiver or an
external NMEA 0183 or NMEA 2000 sentence source.
1. Select the AIS target from the Plotter screen, the Target List, the Friends List, or the
Danger list (pp. 53, 57).
2. Push .
• "COMPOSE OTHER" screen is displayed.
3. Select "Channel," then push [ENT] or [DIAL] to display the Voice channel selection
screen.
L See page 23 for details.
4. Select a channel to assign, and then push [ENT] or [DIAL].
5. Push to send the Individual call.
6. When you receive an Acknowledgment
"Able to comply", an alarm sounds. Push
to turn OFF the alarm.
• The channel assigned in step 4 is automatically
selected.
L If the called station cannot use the channel
that you assigned, a different channel is
selected by the other station.
7. Push .
8. Hold down [PTT] to communicate.
D Using an AIS transponder
When the optional MA-510TR class b ais transponder is connected to the transceiver,
you can transmit an Individual call to a selected AIS target and the voice channel on the
transponder.
L See page 82 for connecting instructions.
NOTE: To ensure correct operation of the DSC function, make sure you correctly set the
CH70 SQL Level. (p. 45)
L See the next page for the operation.
DIGITAL SELECTIVE CALLING (DSC)
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
46