I Geographical Call - Icom IC-M801E Instruction Manual

7
CALL PROCEDURE

I Geographical call

Use the geographical call when urgency or safety mes-
sage announcement is necessary to the ships in the
particular area.
q Push [MODE
SET
w Rotate [CH] to select the "
then push [ENT].
e Rotate [CH] to select the category from "
and "
Ç
r Rotate [CH] to select the desired area designated
method, then push [ENT].
Ç
t Enter the position information
with range or area, then push [ENT].
- When "
- When " " is selected
24
] to select the DSC menu.
," then push [ENT].
(latitude and longitude)
" is selected
y Rotate [CH] to select the desired pre-programmed
," traffic frequency, or "
[ENT].
✔ When the pre-programmed call frequency is se-
"
lected, go to step u.
Ç
• When "
traffic frequency via the keypad.
u Rotate [CH] to select the desired pre-programmed
calling frequency, then push [ENT].
Ç
i The calling stand-by screen is displayed as fol-
lows, verify the calling condition then push and
hold [CALL] for 1 sec. to transmit the position re-
quest call.
• Push and hold [ENT] for 1 sec. to store the calling con-
dition into the TX memory as described in pages 22
and 37, if desired.
" then push
" is selected, enter the desired