I Semi/Auto (Telephone) Call - Icom IC-M801E Instruction Manual

7
CALL PROCEDURE

I Semi/Auto (telephone) call

The frequency for telephone call use are specified by a
coast station, therefore, two calls/acknowledgements
are usually necessary before making a telephone call.
q Push [MODE
SET
w Rotate [CH] to select "
push [ENT].
e Rotate [CH] to select "
[ENT].
Ç
r Select the desired pre-programmed telephone
number or "
• Use [CH] to select the telephone number when pre-pro-
grammed.
Ç
• When "
telephone number via the keypad.
t Rotate [CH] to select the desired coast station
code, then push [ENT].
Ç
26
] to select the DSC menu.
" call, then
" then push
," then push [ENT],
" is selected, enter the desired
• When " " is selected, enter the desired
code (last 7 digits only) via the keypad.
- The first 2 digits "00 (double zero)" are fixed for the
coast station code.
y Rotate [CH] to select 1st telecommand, then push
[ENT].
Ç
u Verify your position and time, then push [ENT].
• When the position or time requires a change, use the
keypad and [CH] for settings.
• [CH] moves the cursor.
i Select the desired pre-programmed transmit and
receive call frequency with [CH], then push [ENT].
Ç