I Memory Reading/Deleting; I Printing Out The Dsc Memory Contents - Icom IC-M801E Instruction Manual

I Memory reading/deleting

q During setup select menu indication, rotate [CH] to
select the desired memory item then push [ENT].
• Push [DSC] to select DSC watch mode.
• Push [MODE ] to select DSC menu.
SET
• Rotate [CH] to select "
w Rotate [CH] to select the desired memory, then
push [ENT].

I Printing out the DSC memory contents

The received DSC call contents can be printed out
when a printer
(IBM ® centronics or compatible)
nected to the transceiver.
The automatic print out capability when a DSC call is
received is available in initial set mode.
q Select the desired received DSC memory as de-
scribed in "Received information" (p. 30).
➥ During DSC watch mode, push [RX
enter the received DSC memory select screen.
• Or, push [MODE
SET
" then push [ENT].
➥ Rotate [CH] to select the desired category from
" " and "
[ENT].
• " " is displayed beside category when
no received message is stored in the category.
➥ Rotate [CH] to select the desired DSC message.
• " " means the DSC messages have not been read.
• " " stands for distress relay.
w Push [ENT] to indicate the contents.
" then push [ENT].
is con-
(p. 46)
] to
CLAR
], rotate [CH] to select "
" then push
DSC MENU OPERATION
e Operate as follows:
➥ When reading the memory contents only;
• Push [ENT] to return to the appropriate mem-
ory list screen.
➥ When deleting the memory contents;
• Push and hold [CE] for 1 sec.
- After deleting, the appropriate memory list screen
is displayed automatically.
e After pushing
push [8
[F],
out the selected DSC memory contents.
[F]
10
] for 1 sec. to print
PRN
[8 ]
PRN
10
41