Icom IC-M801E Instruction Manual page 8

QUICK REFERENCE
D D Regular distress call
q Push [DSC] to enter DSC watch mode.
w Push [MODE
SET
e Rotate [CH] to select "
[ENT].
Ç
r Rotate [CH] to select the desired nature then push
[ENT].
Ç
V
[DSC]
] to enter DSC menu.
[MODE ]
SET
[CH] [ENT]
" then push
t Verify your position and the UTC time, then push
[ENT].
• When no NMEA0183 ver. 3.01 data is applied to [GPS],
your position and UTC time should be input in this step.
- Use the keypad and [CH] when changing your posi-
tion or the time.
- Move the cursor with [CH] rotation.
- [3 ], [6 ], [7] and [9] is used for the 'East,'
-
SCAN RF G
'North,' 'South' and 'West' selection.
y Rotate [CH] to select the DSC calling frequencies,
then push [ENT].
• After pushing [ENT], return to DSC menu as shown in
step e.
Ç
u Lift up the distress switch cover, then push and
hold [DISTRESS] for 5 sec.
[DISTRESS]