I IR function
Radar interference
I STRETCH function
Normal screen
I ZOOM function
Normal screen
With IR function ON
With STRETCH ON
With ZOOM function ON
Radar interference may appear when another ship's
radar is operating on the same frequency band in
close proximity. The IR function can eliminate this type
of interference. (p. 6)
q Push [MENU]/[
] to call up VIDEO menu.
w Push [ ] until the "IR" section becomes highlighted.
e Push [
to select IR function 1, 2 or OFF.
• "IR" appears in the upper right of the screen, when the
function is activated.
The blips can be magnified electronically for easier
viewing of small targets. (p. 6)
q Push [MENU]/[
] to open the VIDEO menu.
w Push [
to select "STRETCH", then push [
turn the function ON.
NOTE: Turn OFF this function during normal opera-
tion.
The ZOOM function expands the target to two times
normal size.
• This function is available up to a 24 NM range or shorter ex-
1
cept
⁄
NM.
8
q Push [
] to move the cursor to the desired
target.
w Push [
]/[
] and [TRAILS]/[
multaneously to toggle the ZOOM function ON and
OFF.
• "ZOOM" appears in the lower right of the screen.
4
BASIC OPERATION
to
] si-
11