Table of Contents
Advertisement
FOREWORD
Thank you for purchasing Icom's MR-1000RII/TII/TIII
MARINE RADAR.
The radar is designed especially for fishing boats. It
has powerful transmission power, 10 inch CRT display
and many other advanced features.
If you have any questions regarding the operation of
the radar, contact your nearest authorized Icom Inc.
dealer.
IMPORTANT
READ ALL INSTRUCTIONS
pletely before attempting to operate the marine radar.
SAVE THIS INSTRUCTION MANUAL.
manual contains important safety and operating in-
structions for the MR-1000RII/TII/TIII.
EXPLICIT DEFINITIONS
The following explicit definitions apply to this instruc-
tion manual.
WORD
Personal injury, fire hazard or electric
R WARNING
shock may occur.
CAUTION
Equipment damage may occur.
If disregarded, inconvenience only.
NOTE
No risk of personal injury, fire or
electric shock.
carefully and com-
This
DEFINITION
PRECAUTION
RNEVER
let metal, wire or other objects touch any
internal part of the radar.
RNEVER
place the radar within the reach of chil-
dren.
RNEVER
expose the display unit to rain, salt water
or any other liquids.
NEVER
connect the radar to AC or more than 42 V
DC. This will damage the radar.
AVOID using the radar near any magnetic materials,
such as a loudspeaker or a large power transformer,
as this can cause distortion of the CRT display.
AVOID placing the display unit in excessively dusty en-
vironments.
AVOID placing the display unit near heating equipment
or in direct sunlight or where hot or cold air blows di-
rectly onto it.
AVOID using the scanner unit in areas where the tem-
perature is below –25˚C (–13˚F) or above +70˚C
(+158˚F). AVOID using the display unit in areas where
the temperature is below –15˚C (+5˚F) or above +55˚C
(+131˚F).
AVOID using strong solvents such as benzene or al-
cohol for cleaning the radar, as they may damage the
surfaces.
BE CAREFUL!
SART signal may not be detected and may
not be displayed on the screen depending
on the SEA, RAIN or IR settings.
Follow the settings as below to detect the
SART signal on the screen.
q Select the screen range between 6 NM
to 12 NM with [+/–]. (p. 2)
w Set the [GAIN] as high as possible. (p. 3)
e Set the [SEA] to minimum. (p. 3)
r Set the [RAIN] to minimum. (p. 3)
t Turn the [IR] OFF.
y Turn the [STRETCH] OFF.
ii
Advertisement
Table of Contents
