Removal And Replacement Procedures For Customer Self-Repair Parts - HP OMEN 17-w001 through 17-w099 Maintenance And Service Manual

Table of Contents

Advertisement

5
Removal and replacement procedures for
Customer Self-Repair parts
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
NOTE:
The Customer Self-Repair program is not available in all locations. Installing a part not supported by
the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.
Component replacement procedures
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
There are two screws that must be removed, replaced, and/or loosened when servicing Customer Self-Repair
parts. Make special note of the screw sizes and locations during removal and replacement.
Labels on page 17
for details.
Component replacement procedures
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omen 17-w201 through 17w299

Table of Contents