Selecting The Position Of The Binding Margin (Binding Position Settings) - Oce CS193 User Manual

Basic copy operations
3.4.6

Selecting the position of the binding margin (Binding Position settings)

If a double-sided original is loaded into the ADF, specify the position of the top of the back side of the original
by specifying the binding margin position for the original.
Note
As the factory default, "Auto" is selected as the position of the binding margin.
Original binding margin position
Original binding margin
When the original length is 297
mm or less:
When the original length is
more than 297 mm:
CS193/CS173/CS163
Icon Description
Left Select this setting if the original is loaded with the binding mar-
gin at the left.
Right Select this setting if the original is loaded with the binding mar-
gin at the right.
Top Select this setting if the original that is loaded has a binding
margin at the top.
Auto Select this setting to automatically select the position of the
binding margin.
If the original length is 297 mm or less, a binding position along
the long side of the paper is selected.
If the original length is more than 297 mm, a binding position
along the short side of the paper is selected.
If "Auto" is selected, the binding margin is set at the top or at
the left.
3
3-27