Before use
1.6.4 Selecting the position of the binding margin (Original
Binding Position/Binding Position settings)
If a double-sided original is loaded into the ADF, specify the position of the top
of the back side of the original by specifying the binding margin position for
the original.
Setting
Description
Left
Select this setting if the original is loaded with the binding margin at the left.
Top
Select this setting if the original that is loaded has a binding margin at the
top.
Right
Select this setting if the original is loaded with the binding margin at the
right.
Auto
With this setting, the binding margin is set at the top or at the left.
Select this setting to automatically select the position of the binding margin.
If the original length is 297 mm or less, a binding position along the long side
of the original is selected.
If the original length is more than 297 mm, a binding position along the short
side of the original is selected.
1
Position the original to be copied.
– For details on positioning the original, refer to
page
1-11.
2
In the Basic screen, touch [Duplex/Combine]. Otherwise touch the
Original/Density tab.
Océ cm3522/cm2522
"Feeding the original" on
1
1-20