Mounting And Removing The Clear Faceplate - Fujitsu F9600 User Manual

MOUNTING AND
REMOVING THE
CLEAR
FACEPLATE
Your Digital Telephone comes equipped with a
faceplate that labels each feature and
extension button. You can alter the recorded
information or install an optional colored insert
in its place.
To remove the clear faceplate:
1. Insert a small tool, e.g. a computer-sized
screwdriver, under the tab opening at the
bottom center of the faceplate. Refer to
Figure 4.
2. Pull up towards you on the faceplate
gently until all of the plastic hooks at the
bottom and on either side of the faceplate
are free.
3. Lift the clear faceplate cover off of the
Digital Telephone.
To install an insert sheet and remount the
faceplate:
1. With the clear faceplate removed, place
the insert sheet over the Digital Telephone
faceplate area.
2. Hold the clear faceplate over the top and
parallel to the Digital Telephone face and
then push it down toward the telephone
until the plastic hooks are firmly in place.
11